Fanttik X8 APEX Tire Inflator and Potent T10 1800 Amp Jump Starter

Each vehicle is different, and manufacturers will provide this information (sometimes contained on the inside of the car door). It's typically around 30 to 35psi, depending on the weight of the vehicle.

About 2-2.5 hrs. Make sure to use a certified 5V/3A adapter and the included charging cable to charge this product.

Yes, install the dedicated connector and adjust the mode to the yellow icon to use it. It is recommended to use nails ≤1.18 inches. (Connector need to be purchased separately)

The product will work fine at the temperature of -10 °C to 45 °C (14 °F to 113 °F). Make sure to store in a dry and secure place.

Step 1: Select the right nozzle to connect with your tire.
Step 2: Press and hold the Power Button for 1.5 seconds to turn on the device.
Step 3: Choose custom mode or smart mode. Custom mode: Find out the correct minimum and maximum tire pressure as required by the manufacturer. Adjust the pressure value by pushing the ’+‘ or ’-‘ button to reach the target pressure and push the power button to start inflating until it automatically stops. Smart Mode: If you don't know the correct pressure values for your tires, just set the product to the relevant mode (bike/car/motorcycle/ball) by pressing the mode button, and push the power button to start inflating until it automatically stops.
Step 4: Press and hold the Power Button for 1.5 seconds to turn off the product and store it away securely.